Label spec matcher
Which label construction survives your surface?
Three questions about where the label lives, what it sticks to and how the data gets on it. The answer is a real starting construction: facestock, adhesive, finish, imaging and format. Nothing is gated, and no email is required to see it.
Spec matcher
Three questions. A real construction.
Your application
Tell us about the job
Where does the label spend its life?
Warehouse, plant floor or retail. Stable temperature, no UV.
How does the data get on it?
Printed in house with a thermal transfer ribbon.
Ambient duty
PVL-AMB-CAR-TTSuggested construction
Bring us a sample of the surface. A five minute peel test settles more arguments than a week of datasheets.
Envoyer cette spécification à un ingénieurA directional starting point from three inputs, not a final specification. Dwell time, surface energy, application temperature, service life and volume decide the rest.
Obtenir une soumission d'étiquettes
Apportez-nous le problème, pas le numéro de pièce.
Dites-nous ce qui fait défaut, ou ce que vous êtes sur le point de lancer. Un ingénieur en étiquettes, pas un centre d'appels, vous reviendra avec une construction, un plan d'échantillonnage et des prix.
Envoyez ce que vous avez déjà
Une photo de l'étiquette du mandrin, un échantillon défaillant ou trois lignes sur l'application. La moitié d'une spécification suffit pour commencer.
Un ingénieur en étiquettes le lit
Pas une file de ventes. La personne qui répond spécifie des constructions d'étiquettes pour gagner sa vie.
Vous recevez une construction et un plan d'échantillonnage
Habituellement dans un délai d'un jour ouvrable, rédigés pour être reproductibles, et testés sur votre ligne avant que vous ne vous engagiez.
Ou joignez-nous directement
Un ingénieur en étiquettes vous reviendra, habituellement dans un délai d'un jour ouvrable.
Veuillez vérifier les champs obligatoires et votre adresse courriel, puis renvoyer le formulaire, ou appeler au 800 263 4258.
Asked on the floor
The five questions that decide a label
Answers from the same service and materials record the matcher runs on, written the way the question is actually asked.
Which label material survives outdoors?
White PET with an all weather permanent acrylic and a UV stable gloss overlaminate. Run your own surface, temperature and exposure through the matcher above to confirm it against the job in front of you.
Can I use direct thermal labels outdoors?
Direct thermal fades under UV and heat, so expect months rather than years. For outdoor legibility, move to thermal transfer with a resin ribbon.
What sticks to a rough or powder coated surface?
Rough and powder coated surfaces need dwell time. Expect reduced initial tack and plan for 24 to 72 hours before the bond reaches full strength.
What changes for a freezer label?
Application temperature matters more than storage temperature. Applied below freezing, the adhesive must be rated for cold application, not just cold service.
Why does my label peel off a curved surface?
On a tight radius the label peels from the trailing edge. Radius the corners, keep the facestock thin, and avoid bridging a compound curve.
Send us the surface, not just the spec
Three inputs get you a starting construction. Dwell time, surface energy, application temperature, service life and volume decide the rest, and a five minute peel test settles more arguments than a week of datasheets.